Paraffin Powder Spraying Machine
1. Introduction of the machine
By spraying the paraffin powder machine makes liquid into powder used by punching candle machine and pressing candle machine.
The characteristics of the machines are structure reasonable, beautiful outward, highly automatic (automatically cleaning the remaining liquid in the pipes and pump). It is safety to use the machines, as which giving up shortcoming of operating difficulty, easy bomb and unsafe, which using the method of absorbing liquid and spraying outside which having advantage of high spraying and powder well distributed.
2. Character specification
Spraying powder height: about 5 meter
Efficiency: 320 KGs/Hour
Spraying paraffin powder machine preheating temperature: 1KW
Main motor power: 0.75 KW
Power: 3 Phase 50/60 HZ 380 V
3. The method of operation
The spraying paraffin powder machine
first melting paraffin into liquid according to the method of using of melting paraffin machine, connect the pipes between the melting paraffin machine and the spraying paraffin powder machine (attention: the pipe should be straight and inline angle).
Preheating: turn on the power switch, the power display light is bright, the machine first starts preheating program, when the preheating light is bright, the machine starts to automatically clean the remain paraffin in the pipes and machine. It is about 30 seconds.
Start: at the end of preheating and cleaning work, push the start button to spray paraffin powder.
Attention: the operation order, first push the start button on the spraying paraffin powder machine, and then turn on the valve between the melting paraffin machine and the spraying paraffin powder machine, otherwise the pipe which just cleaned may be blocked up, which the spraying powder can not be carried out.
Stop spraying paraffin powder: if the spraying paraffin powder machine should be stopped and the liquid in the box of the melting paraffin machine is used up, the operation order, first push the stop button (at the same time, the machine automatically cleaning the remain paraffin in the pipe and pump) about 10~20 seconds; (cleaning time is 30 seconds) turn off the valve between the melting paraffin machine and the spraying paraffin powder machine before the end of cleaning,
Attention: if turn off the valve at the end of automatically cleaning work, next time the spraying paraffin powder work can not be done on the machine.
The height of workshop of the spraying paraffin machine is not less than 5 meter, the area is not less than 9 square meter.
The spraying paraffin powder machine should be strictly operated according to the above operating order, otherwise, it has unnecessary inconvenient.
5. Safety using power
The machine using 3 phases 4 lines alternative power, line voltage 380V phase voltage 220 V frequency 50/60 HZ.
The diameter of copper line of power of the melting paraffin machine 6 square mm
The diameter of copper line of power of the spraying paraffin powder machine 2.5 square mm
The outward of the machine should be connected with ground.